NavPod RMX4500-08 RailMount Pre-Cut f/Garmin 922 / 922xs / 942 / 942xs [RMX4500-08]
Review: 5 - "A masterpiece of literature" by , written on May 4, 20020
Great
  • electro-track-order-icon
  • Free Shipping
    From $99+
  • electro-thumb
  • 5% Checkout
    Discount
  • electro-return-icon
  • 30 Day
    Returns
  • electro-payment
  • Secure
    Payments
  • electro-brands-icon
  • Top
    Brands

NavPod RMX4500-08 RailMount Pre-Cut f/Garmin 922 / 922xs / 942 / 942xs [RMX4500-08]

Available:Out of Stock
$549.99
Successful pre-order.Thanks for contacting us!

RailMount Pre-Cut f/Garmin 922 / 922xs / 942 / 942xs

RailMount NavPods are best used for mounting of an autopilot control, sailing instrument, or small chartplotter onto an existing pedestal guard. Fits onto any 1” or 1.25” diameter tube. A Nickel Chrome Plated Stainless Steel arm is used to mount a NavPod. The NavPod can rotate 180 degrees for easy viewing while sitting under the dodger on a rainy day. All wiring runs from the NavPod, down the center of the stainless steel arm, and into the pedestal guard. This application provides a clean and sturdy installation for electronics, without replacement of the pedestal guard.

RailMounts are designed for all popular standard size instruments as well as 7 and 9 inch charplotters.

Gen3 – “The best just got better”

Structural Rigidity
The Gen3 enhancements now include a thicker gauge Acrylic Capped ABS material that improves strength and provides better structural rigidity. This thicker material allows for a larger waterproof seal. The better the structural rigidity, the less flexing when tightening and more uniform pressure on the seal. The excellent UV stability of the Acrylic is combined with the durability of the ABS. The Acrylic cap protects the ABS from UV and it’s potentially damaging effects on plastic. These new NavPods are really strong!

Waterproof Seal
All NavPods are manufactured with a double gasket system providing an excellent watertight seal between the front and back of the NavPod. This seal provides the best protection of your Marine Electronics. NavPods are made to withstand the harshest wet offshore boating conditions. Gen3 enhancements include a thicker external silicone gasket with improved flush fit. The internal Poran Microcell Polyurathane gasket is now 50% thicker and is not subject to “compression set” like many rubber compounds. This is important when you need to open the NavPod in the future in order to service your electronics. The gasket will continue to do its job.

Nickel Chrome Plated Stainless Steel
We use all 316 stainless steel hardware that is supplied with each NavPod. Large round head tamperproof screws have deeper sockets for the NavPod wrench for better holding ability when tightening than screws used on our Traditional Series NavPod. For Gen3 NavPods we provide nickel chrome-plated stainless steel tamperproof screws for security combined with a little bling!

Commitment to quality
We are committed to producing high quality Waterproof Housings for Marine Electronics. We stand behind our commitment by offering a 10-year warranty on all new Gen3 NavPods. We want you to be a NavPod customer for life and are willing to earn your trust and loyalty.

Specifications:

  • Cut/Uncut: Cut
  • Mounting Style: Rail
  • Box Dimensions: 7"H x 10"W x 14"L WT: 6.2 lbs
  • UPC: 659988114379

RailMount Pre-Cut f/Garmin 922 / 922xs / 942 / 942xs

RailMount NavPods are best used for mounting of an autopilot control, sailing instrument, or small chartplotter onto an existing pedestal guard. Fits onto any 1” or 1.25” diameter tube. A Nickel Chrome Plated Stainless Steel arm is used to mount a NavPod. The NavPod can rotate 180 degrees for easy viewing while sitting under the dodger on a rainy day. All wiring runs from the NavPod, down the center of the stainless steel arm, and into the pedestal guard. This application provides a clean and sturdy installation for electronics, without replacement of the pedestal guard.

RailMounts are designed for all popular standard size instruments as well as 7 and 9 inch charplotters.

Gen3 – “The best just got better”

Structural Rigidity
The Gen3 enhancements now include a thicker gauge Acrylic Capped ABS material that improves strength and provides better structural rigidity. This thicker material allows for a larger waterproof seal. The better the structural rigidity, the less flexing when tightening and more uniform pressure on the seal. The excellent UV stability of the Acrylic is combined with the durability of the ABS. The Acrylic cap protects the ABS from UV and it’s potentially damaging effects on plastic. These new NavPods are really strong!

Waterproof Seal
All NavPods are manufactured with a double gasket system providing an excellent watertight seal between the front and back of the NavPod. This seal provides the best protection of your Marine Electronics. NavPods are made to withstand the harshest wet offshore boating conditions. Gen3 enhancements include a thicker external silicone gasket with improved flush fit. The internal Poran Microcell Polyurathane gasket is now 50% thicker and is not subject to “compression set” like many rubber compounds. This is important when you need to open the NavPod in the future in order to service your electronics. The gasket will continue to do its job.

Nickel Chrome Plated Stainless Steel
We use all 316 stainless steel hardware that is supplied with each NavPod. Large round head tamperproof screws have deeper sockets for the NavPod wrench for better holding ability when tightening than screws used on our Traditional Series NavPod. For Gen3 NavPods we provide nickel chrome-plated stainless steel tamperproof screws for security combined with a little bling!

Commitment to quality
We are committed to producing high quality Waterproof Housings for Marine Electronics. We stand behind our commitment by offering a 10-year warranty on all new Gen3 NavPods. We want you to be a NavPod customer for life and are willing to earn your trust and loyalty.

Specifications:

  • Cut/Uncut: Cut
  • Mounting Style: Rail
  • Box Dimensions: 7"H x 10"W x 14"L WT: 6.2 lbs
  • UPC: 659988114379

SHIPPING POLICY

WHEN WILL YOUR ITEMS SHIP?

We offer same day shipping for all orders received by 4:00 pm EST Monday - Friday. All orders are subject to a handling period before shipment, usually 1 - 2 business days.  All orders are shipped from our warehouses in the United States. We ship to the United States & Canada only.  

You will receive notification of shipment along with the tracking number for you shipment.  All orders are shipped via FEDEX, UPS or USPS.  Please allow 3 -7 business days to receive your order. Delivery times may vary depending on holidays, season and weather constraints. 

Orders may be cancelled if they have not been processed and shipped. After your orders have been processed they may not be cancelled.

Please make sure to provide the correct shipping address. Gadget Majig LLC will not be held responsible for items shipped to incorrect addresses provided by the buyer. In such cases, the buyer will be responsible for any additional shipping fees incurred to ship the product to the correct address.

Shipments to Canada will require import/customs taxes to be paid. These will be the responsibility of the buyer under ALL CIRCUMSTANCES. Gadget Majig LLC. and it's affiliates will not and is not responsible for customs taxes incurred by the buyer/purchaser of products on our platform.

HOW DO I TRACK MY ORDER?

You can track your order once it has been shipped by clicking here

WHERE ARE MY ITEMS COMING FROM?

All products ship from the United States.

WILL MY ITEMS BE SENT IN ONE PACKAGE?

For logistical reasons, items will sometimes be sent in separate packages. Please keep this in mind when receiving deliveries. If you have any other questions, please contact us.

 RETURN POLICY

Returns will be accepted within 30 working days of delivery. To initiate your return, please contact us at info@gadgetmajig.com to receive your returns number. Any unauthorized returns will result in refunds being delayed.

If your item is received damaged, we require you to first send us a picture showing the damage and upon inspection we will tell you whether it fits our criteria for replacement. Purchaser/Shopper/Buyer pays all shipping cost.

All items must be in an unused re-salable condition and in it's original packaging. We reserve the right to reject any return that does not fit this criteria.

If your item is in working condition, but you have ordered in error or no longer require the item then we reserve the right to charge a 50% restocking fee.

Please include the returns number we provide so that the refund can be properly processed. If you don't include the returns number then we can't guarantee that your refund will be processed.

Buyer is responsible for paying return shipping costs. We recommend using a traceable shipping service to ensure your return is delivered.