NavPod RMX4407 RailMount Pre-Cut f/Simrad NSS7/B&G Zeus T7 [RMX4407]
Review: 5 - "A masterpiece of literature" by , written on May 4, 2006
I really enjoyed this book. It captures the essential challenge people face as they try make sense of their lives and grow to adulthood.
Categories
  • Fast
    Shipping
  • Quick
    Return
  • Secure
    Payment
  • Best
    Brands

NavPod RMX4407 RailMount Pre-Cut f/Simrad NSS7/B&G Zeus T7 [RMX4407]

Available: Out of Stock
$432.99 $459.99
Successful pre-order.Thanks for contacting us!
Secure

RMX4407 RailMount Pre-Cut for Simrad NSS7/B&G Zeus T7

The RailMount NavPods are best used for mounting of an autopilot control, sailing instrument, or small chartplotter onto an existing pedestal guard. Fits onto any 1" or 1.25" diameter tube. A Chromed Stainless Steel arm is used to mount a NavPod. The NavPod can rotate 180 degrees for easy viewing while sitting under the dodger on a rainy day. All wire run from the NavPod, down the center of the stainless steel arm, and into the pedestal guard. This application provides a clean and sturdy installation for electronics, without replacement of the pedestal guard.

All RailMount NavPods Include:

  • Acrylic capped ABS plastic
  • Chromed stainless steel tamper-proof fasteners
  • Double Seal for watertight integrity
  • Models are available pre-cut for popular electronics.
  • Chromed stainless steel arm with swivel mount
  • Two sets of adaptors included for 1" or 1.25" diameter tubing



The Hi-Gloss Material
  • NavPods are manufactured with a custom co-extruded acrylic capped ABS material. We use the absolute best UV resistant material that provides a very high gloss white finish that matches gel-coated fiberglass. The Gen3 enhancements now include a thicker gauge material that improves strength and provides for better structural rigidity.

The Waterproof Seal
  • All NavPods are manufactured with a double gasket system providing an excellent watertight seal between the front and back of the NavPod for protection of your Marine Electronics. NavPods are made to withstand the harshest of wet offshore boating conditions. Gen3 enhancements include a thicker external silicone gasket with improved flush fit. The internal EPDM gasket is now 50% thicker and is not subject to "compression set" like many rubber compounds. This is important when you need to open the NavPod in the future to service your electronics.

The Nickel Chrome Plated Screws
  • We use all stainless steel mounting hardware that is supplied with each NavPod. Large round head tamperproof screws have deeper sockets for the NavPod wrench for better holding ability when tightening than the previous screws. For Gen3 we provide nickel chrome-plated stainless steel tamperproof screws for security combined with a little bling!

The Manufacturing Process
  • Heavy-gauge thermoforming is considered an art since many processes come into play. It all starts with the design and development of the tooling. We are fortunate to have experienced in-house design engineers who utilize CAD programs like Solidworks, Catia and AutoCad. Surfcam is used to interface with our CNC machining centers to produce quality tools with precision tolerances.

Our Commitment to Quality
  • We are committed to producing the best possible waterproof housing for Marine Electronics. Now with two decades of experience under our belt, we are confident you will have years of trouble free service and a long lasting high gloss finish. We will stand behind our commitment by now offering a 10-year warranty on all new Gen3 NavPods.

Specifications:

  • Cut/Uncut: Cut
  • Mounting Style: Rail
  • Box Dimensions: 6"H x 10"W x 14"L WT: 6.05 lbs
  • UPC: 659988109849

RMX4407 RailMount Pre-Cut for Simrad NSS7/B&G Zeus T7

The RailMount NavPods are best used for mounting of an autopilot control, sailing instrument, or small chartplotter onto an existing pedestal guard. Fits onto any 1" or 1.25" diameter tube. A Chromed Stainless Steel arm is used to mount a NavPod. The NavPod can rotate 180 degrees for easy viewing while sitting under the dodger on a rainy day. All wire run from the NavPod, down the center of the stainless steel arm, and into the pedestal guard. This application provides a clean and sturdy installation for electronics, without replacement of the pedestal guard.

All RailMount NavPods Include:

  • Acrylic capped ABS plastic
  • Chromed stainless steel tamper-proof fasteners
  • Double Seal for watertight integrity
  • Models are available pre-cut for popular electronics.
  • Chromed stainless steel arm with swivel mount
  • Two sets of adaptors included for 1" or 1.25" diameter tubing



The Hi-Gloss Material
  • NavPods are manufactured with a custom co-extruded acrylic capped ABS material. We use the absolute best UV resistant material that provides a very high gloss white finish that matches gel-coated fiberglass. The Gen3 enhancements now include a thicker gauge material that improves strength and provides for better structural rigidity.

The Waterproof Seal
  • All NavPods are manufactured with a double gasket system providing an excellent watertight seal between the front and back of the NavPod for protection of your Marine Electronics. NavPods are made to withstand the harshest of wet offshore boating conditions. Gen3 enhancements include a thicker external silicone gasket with improved flush fit. The internal EPDM gasket is now 50% thicker and is not subject to "compression set" like many rubber compounds. This is important when you need to open the NavPod in the future to service your electronics.

The Nickel Chrome Plated Screws
  • We use all stainless steel mounting hardware that is supplied with each NavPod. Large round head tamperproof screws have deeper sockets for the NavPod wrench for better holding ability when tightening than the previous screws. For Gen3 we provide nickel chrome-plated stainless steel tamperproof screws for security combined with a little bling!

The Manufacturing Process
  • Heavy-gauge thermoforming is considered an art since many processes come into play. It all starts with the design and development of the tooling. We are fortunate to have experienced in-house design engineers who utilize CAD programs like Solidworks, Catia and AutoCad. Surfcam is used to interface with our CNC machining centers to produce quality tools with precision tolerances.

Our Commitment to Quality
  • We are committed to producing the best possible waterproof housing for Marine Electronics. Now with two decades of experience under our belt, we are confident you will have years of trouble free service and a long lasting high gloss finish. We will stand behind our commitment by now offering a 10-year warranty on all new Gen3 NavPods.

Specifications:

  • Cut/Uncut: Cut
  • Mounting Style: Rail
  • Box Dimensions: 6"H x 10"W x 14"L WT: 6.05 lbs
  • UPC: 659988109849

SHIPPING POLICY

WHEN WILL MY ITEMS SHIP?

All orders are subject to a handling period before shipment, usually 1 - 3 business days.  All orders are shipped from our warehouses in the United States. We ship to the United States & Canada only.  

You will then receive notification of shipment with full tracking information.  All orders are shipped via UPS, FEDEX or USPS.  Please allow 3 -7 business days to receive your order, delivery times may vary depending on season and weather constraints. 

Orders may be cancelled if they have not been processed and shipped. After your orders have been processed they may not be cancelled.

Please make sure to provide the correct shipping address. Gadget Majig can not be held responsible for items shipped to incorrect addresses provided by the buyer. In such cases, the buyer will be responsible for any additional shipping fees incurred to ship to the correct address.

In some cases, international shipments will require import/customs taxes to be paid. These will be the responsibility of the buyer under ALL CIRCUMSTANCES. Gadget Majig LLC. and it's affiliates will not and is not  responsible for customs taxes incurred by the buyer/purchase of products on our platform.

HOW DO I TRACK MY ORDER?

You can track your order once it has been shipped by clicking here

WHERE ARE MY ITEMS COMING FROM?

All products ship from The United States and orders ship to the United States and Canada only.

WILL MY ITEMS BE SENT IN ONE PACKAGE?

For logistical reasons, items will sometimes be sent in separate packages. Please keep this in mind when receiving deliveries. If you have any other questions, please contact us.

RETURN POLICY

Returns will be accepted within 30 working days of delivery. To initiate your return, please contact us at info@gadgetmajig.com to receive your returns number. Any unauthorized returns will result in refunds being delayed.

If your item is received damaged, we require you to first send us a picture showing the damage and upon inspection we will tell you whether it fits our criteria for replacement. Purchaser/Shopper/Buyer pays all shipping cost.

All items must be in an unused re-salable condition and in it's original packaging. We reserve the right to reject any return that does not fit this criteria.

If your item is in working condition, but you have ordered in error or no longer require the item then we reserve the right to charge a 50% restocking fee.

Please include the returns number we provide so that the refund can be properly processed. If you don't include the returns number then we can't guarantee that your refund will be processed.

Buyer is responsible for paying return shipping costs. We recommend using a traceable shipping service to ensure your return is delivered.