Boat Leveler 18" x 9" Trim Tab Set [N189000]
Review: 5 - "A masterpiece of literature" by , written on May 4, 2006
I really enjoyed this book. It captures the essential challenge people face as they try make sense of their lives and grow to adulthood.
Categories
  • Fast
    Shipping
  • Quick
    Return
  • Secure
    Payment
  • Best
    Brands

Boat Leveler 18" x 9" Trim Tab Set [N189000]

Available: Out of Stock
$537.99 $735.00
Successful pre-order.Thanks for contacting us!
Secure

Features:

Wiring

  • Color-coded wiring in 25' to 40' lengths with quick connects fittings, meets federal standards for heat, pull and insulation, making installation easy.

Solenoids
  • They are custom designed for Insta-Trim Boat Leveler Co., epoxy sealed and humidity resistant, thereby preventing shorting out. The solenoids lock the tabs in any position, eliminating driftback. Barb type hose fittings provide tight, secure connections.

Motor
  • A powerhouse with coated wirings and a thermal overload that resists temperature and amperage build-up. 1 3/4" stack windings and top mounting eliminated oil leakage. The motor is mounted with stainless steel nuts and bolts, and is easily disassembled.

Brackets
  • Swivel type brackets allow cylinders to be mounted an adjusted to any angle. Knockout pins act as shear pins it tab strikes an object.

Pump
  • Designed and engineered exclusively by Instatrim. The built-in bypass is factory set at 400 P.S.I. tolerance held to .00025. Amperage doesn't exceed 16 because the unit circulates oil, rather than stalling out or trying to pump additional pressure.

Motor Cover
  • 4 1/2" D x 6" W x 11"H, high impact ABS plastic cover with a built-in oil reservoir mounts easily with two screws. The filler is located in front. Our cover protects the motor from occasional wash down.

Cylinders
  • Impact resistant, fiberglass reinforced nylon cylinders eliminates expansion and resists ultra-violet rays. Two expanding type seals, plus O-ring, eliminates high and low pressure leaks. Barbed cylinder fitting and an inserted tubular rod prevents hose blow-off and breakage.
    A stainless steel spring retracts the cylinder when the boat is not in motion.

Trim Tabs
  • 12 gauge 304 stainless steel trim tabs are available in standard and custom lengths. They are guaranteed against electrolysis, remaining strong and secure. Insta-Trim's hinges prevent most spray and can be used for transom or bottom mounting.

Hose
  • Designed and manufactured exclusively for Insta-Trim with nylon-reinforced webbing and protective PVC coating. Rated at 2000 lb. burst pressure, 15' of hose is supplied for your system. Entering the transom 6" above the water line, the hoses are held securely with hose trim.
    Stainless steel clamps hold the hose to barb fitting at the solenoid.

Rocker Type Controls
  • Mounted on the dash they are easy to operate. 2TP Micro switch with silver contact points adjust the tabs for maximum control and performance.


One pint of Insta-Trim biodegradable transmission oil, funnel and mounting hardware is supplied.


Specifications:

  • Construction: Stainless Steel
  • Actuator Type: Hydraulic
  • Box Dimensions: 9"H x 13"W x 19"L WT: 27.4 lbs

Quick Guide (pdf)
Owner's Manual (pdf)

Features:

Wiring

  • Color-coded wiring in 25' to 40' lengths with quick connects fittings, meets federal standards for heat, pull and insulation, making installation easy.

Solenoids
  • They are custom designed for Insta-Trim Boat Leveler Co., epoxy sealed and humidity resistant, thereby preventing shorting out. The solenoids lock the tabs in any position, eliminating driftback. Barb type hose fittings provide tight, secure connections.

Motor
  • A powerhouse with coated wirings and a thermal overload that resists temperature and amperage build-up. 1 3/4" stack windings and top mounting eliminated oil leakage. The motor is mounted with stainless steel nuts and bolts, and is easily disassembled.

Brackets
  • Swivel type brackets allow cylinders to be mounted an adjusted to any angle. Knockout pins act as shear pins it tab strikes an object.

Pump
  • Designed and engineered exclusively by Instatrim. The built-in bypass is factory set at 400 P.S.I. tolerance held to .00025. Amperage doesn't exceed 16 because the unit circulates oil, rather than stalling out or trying to pump additional pressure.

Motor Cover
  • 4 1/2" D x 6" W x 11"H, high impact ABS plastic cover with a built-in oil reservoir mounts easily with two screws. The filler is located in front. Our cover protects the motor from occasional wash down.

Cylinders
  • Impact resistant, fiberglass reinforced nylon cylinders eliminates expansion and resists ultra-violet rays. Two expanding type seals, plus O-ring, eliminates high and low pressure leaks. Barbed cylinder fitting and an inserted tubular rod prevents hose blow-off and breakage.
    A stainless steel spring retracts the cylinder when the boat is not in motion.

Trim Tabs
  • 12 gauge 304 stainless steel trim tabs are available in standard and custom lengths. They are guaranteed against electrolysis, remaining strong and secure. Insta-Trim's hinges prevent most spray and can be used for transom or bottom mounting.

Hose
  • Designed and manufactured exclusively for Insta-Trim with nylon-reinforced webbing and protective PVC coating. Rated at 2000 lb. burst pressure, 15' of hose is supplied for your system. Entering the transom 6" above the water line, the hoses are held securely with hose trim.
    Stainless steel clamps hold the hose to barb fitting at the solenoid.

Rocker Type Controls
  • Mounted on the dash they are easy to operate. 2TP Micro switch with silver contact points adjust the tabs for maximum control and performance.


One pint of Insta-Trim biodegradable transmission oil, funnel and mounting hardware is supplied.


Specifications:

  • Construction: Stainless Steel
  • Actuator Type: Hydraulic
  • Box Dimensions: 9"H x 13"W x 19"L WT: 27.4 lbs

Quick Guide (pdf)
Owner's Manual (pdf)

SHIPPING POLICY

WHEN WILL MY ITEMS SHIP?

All orders are subject to a handling period before shipment, usually 1 - 3 business days.  All orders are shipped from our warehouses in the United States. We ship to the United States & Canada only.  

You will then receive notification of shipment with full tracking information.  All orders are shipped via UPS, FEDEX or USPS.  Please allow 3 -7 business days to receive your order, delivery times may vary depending on season and weather constraints. 

Orders may be cancelled if they have not been processed and shipped. After your orders have been processed they may not be cancelled.

Please make sure to provide the correct shipping address. Gadget Majig can not be held responsible for items shipped to incorrect addresses provided by the buyer. In such cases, the buyer will be responsible for any additional shipping fees incurred to ship to the correct address.

In some cases, international shipments will require import/customs taxes to be paid. These will be the responsibility of the buyer under ALL CIRCUMSTANCES. Gadget Majig LLC. and it's affiliates will not and is not  responsible for customs taxes incurred by the buyer/purchase of products on our platform.

HOW DO I TRACK MY ORDER?

You can track your order once it has been shipped by clicking here

WHERE ARE MY ITEMS COMING FROM?

All products ship from The United States and orders ship to the United States and Canada only.

WILL MY ITEMS BE SENT IN ONE PACKAGE?

For logistical reasons, items will sometimes be sent in separate packages. Please keep this in mind when receiving deliveries. If you have any other questions, please contact us.

RETURN POLICY

Returns will be accepted within 30 working days of delivery. To initiate your return, please contact us at info@gadgetmajig.com to receive your returns number. Any unauthorized returns will result in refunds being delayed.

If your item is received damaged, we require you to first send us a picture showing the damage and upon inspection we will tell you whether it fits our criteria for replacement. Purchaser/Shopper/Buyer pays all shipping cost.

All items must be in an unused re-salable condition and in it's original packaging. We reserve the right to reject any return that does not fit this criteria.

If your item is in working condition, but you have ordered in error or no longer require the item then we reserve the right to charge a 50% restocking fee.

Please include the returns number we provide so that the refund can be properly processed. If you don't include the returns number then we can't guarantee that your refund will be processed.

Buyer is responsible for paying return shipping costs. We recommend using a traceable shipping service to ensure your return is delivered.