FloJet RV Macerator Pump [18550000A]
Review: 5 - "A masterpiece of literature" by , written on May 4, 2006
I really enjoyed this book. It captures the essential challenge people face as they try make sense of their lives and grow to adulthood.
Categories
  • Fast
    Shipping
  • Quick
    Return
  • Secure
    Payment
  • Best
    Brands

FloJet RV Macerator Pump [18550000A]

Available: In Stock
$215.99 $259.99
Image
  • Order within
Secure

RV Macerator Pump from Flojet

Designed to add flexibility to Holding Tank service. With the Flojet Waste Pump you can not only empty the black and grey water tanks at the conventional Dump Station, but also down a toilet, into your house sewer clean-out, septic tank or into a mobile waste wagon.

The Flojet macerator pump will empty a typical 30-gallon holding tank in less than three minutes. The time increases somewhat as the distance pumped is increased beyond 25'. The pump will macerate and pump all waste and tissue normally found in RV waste systems. The same high quality Jabsco design found in boat stores worldwide. Put an end to handling and rinsing a dirty 3" sewer hose; instead use a cleaner, easier to handle garden hose. Now you can pump up hill, and around corners. The RV waste pump will simplify and improve your RV experience!

Features:

  • Neat and clean way to quickly evacuate waste tanks
  • Empty black-water and greywater Holding Tanks at home
  • Grinds waste as it pumps
  • Built-in Impeller Protection Device...longer life!
  • Flow of up to 13 GPM for fast, clean Holding Tank evacuation


Easy to Install
Because it is self-priming, it may be located up to four feet above the tank liquid level. The intake port is designed to accept a 3" ID slip-on hose and the discharge port will accept a 1" ID hose. When installed, the macerator can be used to empty the holding tank into any convenient sewer receiver such as a sewer clean-out at your home.

Applications
  • Empty holding tanks and avoid dump stations
  • Transfer waste from recirculating toilets to main holding tank


Impeller Release Feature
After long periods of non-use, a stuck impeller can be easily broken loose with a screwdriver inserted in motor shaft slot. Simply turn shaft clockwise as shown.

Specifications
Pump: Self-Priming Flexible Impeller with Stainless Steel Wearplate
Impeller: "Jabsco Nitrile" compound
Macerator: Stainless Steel Cutter reduces particle size to 1/8" (3mm) maximum
Seal: Lip Type
Ports: Inlet RV model - 3" (76mm) hose
Outlet - 1" (19mm) Hose Barb

Motor: Permanent Magnet Type, Fully Enclosed, with Stainless Steel Shaft Includes Impeller Protection Device that shuts-off pump after 20 seconds of run-dry
Complies with USCG Regulation 183.410
& ISO 8846 MARINE for Ignition Protection

Weight: 3.5lb (1.6 kg) Approx.

WarningWARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.


Owner's Manual (pdf)
Brochure (pdf)

RV Macerator Pump from Flojet

Designed to add flexibility to Holding Tank service. With the Flojet Waste Pump you can not only empty the black and grey water tanks at the conventional Dump Station, but also down a toilet, into your house sewer clean-out, septic tank or into a mobile waste wagon.

The Flojet macerator pump will empty a typical 30-gallon holding tank in less than three minutes. The time increases somewhat as the distance pumped is increased beyond 25'. The pump will macerate and pump all waste and tissue normally found in RV waste systems. The same high quality Jabsco design found in boat stores worldwide. Put an end to handling and rinsing a dirty 3" sewer hose; instead use a cleaner, easier to handle garden hose. Now you can pump up hill, and around corners. The RV waste pump will simplify and improve your RV experience!

Features:

  • Neat and clean way to quickly evacuate waste tanks
  • Empty black-water and greywater Holding Tanks at home
  • Grinds waste as it pumps
  • Built-in Impeller Protection Device...longer life!
  • Flow of up to 13 GPM for fast, clean Holding Tank evacuation


Easy to Install
Because it is self-priming, it may be located up to four feet above the tank liquid level. The intake port is designed to accept a 3" ID slip-on hose and the discharge port will accept a 1" ID hose. When installed, the macerator can be used to empty the holding tank into any convenient sewer receiver such as a sewer clean-out at your home.

Applications
  • Empty holding tanks and avoid dump stations
  • Transfer waste from recirculating toilets to main holding tank


Impeller Release Feature
After long periods of non-use, a stuck impeller can be easily broken loose with a screwdriver inserted in motor shaft slot. Simply turn shaft clockwise as shown.

Specifications
Pump: Self-Priming Flexible Impeller with Stainless Steel Wearplate
Impeller: "Jabsco Nitrile" compound
Macerator: Stainless Steel Cutter reduces particle size to 1/8" (3mm) maximum
Seal: Lip Type
Ports: Inlet RV model - 3" (76mm) hose
Outlet - 1" (19mm) Hose Barb

Motor: Permanent Magnet Type, Fully Enclosed, with Stainless Steel Shaft Includes Impeller Protection Device that shuts-off pump after 20 seconds of run-dry
Complies with USCG Regulation 183.410
& ISO 8846 MARINE for Ignition Protection

Weight: 3.5lb (1.6 kg) Approx.

WarningWARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.


Owner's Manual (pdf)
Brochure (pdf)

SHIPPING POLICY

WHEN WILL MY ITEMS SHIP?

All orders are subject to a handling period before shipment, usually 1 - 3 business days.  All orders are shipped from our warehouses in the United States. We ship to the United States & Canada only.  

You will then receive notification of shipment with full tracking information.  All orders are shipped via UPS, FEDEX or USPS.  Please allow 3 -7 business days to receive your order, delivery times may vary depending on season and weather constraints. 

Orders may be cancelled if they have not been processed and shipped. After your orders have been processed they may not be cancelled.

Please make sure to provide the correct shipping address. Gadget Majig can not be held responsible for items shipped to incorrect addresses provided by the buyer. In such cases, the buyer will be responsible for any additional shipping fees incurred to ship to the correct address.

In some cases, international shipments will require import/customs taxes to be paid. These will be the responsibility of the buyer under ALL CIRCUMSTANCES. Gadget Majig LLC. and it's affiliates will not and is not  responsible for customs taxes incurred by the buyer/purchase of products on our platform.

HOW DO I TRACK MY ORDER?

You can track your order once it has been shipped by clicking here

WHERE ARE MY ITEMS COMING FROM?

All products ship from The United States and orders ship to the United States and Canada only.

WILL MY ITEMS BE SENT IN ONE PACKAGE?

For logistical reasons, items will sometimes be sent in separate packages. Please keep this in mind when receiving deliveries. If you have any other questions, please contact us.

RETURN POLICY

Returns will be accepted within 30 working days of delivery. To initiate your return, please contact us at info@gadgetmajig.com to receive your returns number. Any unauthorized returns will result in refunds being delayed.

If your item is received damaged, we require you to first send us a picture showing the damage and upon inspection we will tell you whether it fits our criteria for replacement. Purchaser/Shopper/Buyer pays all shipping cost.

All items must be in an unused re-salable condition and in it's original packaging. We reserve the right to reject any return that does not fit this criteria.

If your item is in working condition, but you have ordered in error or no longer require the item then we reserve the right to charge a 50% restocking fee.

Please include the returns number we provide so that the refund can be properly processed. If you don't include the returns number then we can't guarantee that your refund will be processed.

Buyer is responsible for paying return shipping costs. We recommend using a traceable shipping service to ensure your return is delivered.